Driver

Supported
Device

Features

Modbus Ethernet
(Master & Slave)

• Modbus Ethernet
• Applicom: Generic Modbus, TSX Premium, TSX Quantum
• Mailbox - Consult your Modicon Documentation on the MSTR instruction for sending unsolicited requests to the Modbus Ethernet driver
• Fluenta FGM
• Roxar RFM
• Instromet

• Automatic Tag Database Generation
• Supports Multiple PLCs via IP addressing
• Supports Modicon Ethernet to Modbus Plus bridging
• Supports Multiple or Single socket usage for better gateway resource management
• Supports Tag import from Concept and ProWORX programming packages
• Supports Memory Accesses to 65535
• Hex Addressing Support (0-FFFF)
• User Definable Read Block Sizes
• Adjustable Address Base ( 0 or 1 )
• Word Order Swapping for Floating Point and Longs
• 0xxxx - Output Coils, 1xxxx - Input Coils, 3xxxx - Internal Registers, 4xxxx - Holding Registers
• All data types and arrays are supported

Modbus RTU Serial

• Modbus compatible devices
• Elliott Flow Computer
• Magnetek GPD 515 Drive
• Omni Flow Computer
• Daniel S500 Flow Computer
• Dynamic Fluid Meter
• TSXCUSBMBP USB Adapter

• Supports Ethernet Encapsulation
• Supports the TSXCUSBMBP USB adapter for the Modbus Plus Network
• Modbus RTU Multi-drop Supported
• Automatic Tag Database Generation
• Supports Broadcast Messages using device ID 0
• Full Address Range Support ( 0 - 65535 )
• Hex Addressing Support (0-FFFF)
• User Definable Read Block Sizes
• Adjustable Address Base( 0 or 1 )
• Word Order Swapping for Floating Point and Longs
• Byte Order Swapping on all 16 bit and 32 bit values
• Adjustable RTS Flow timing for Radio Modems
• Supports all memory types and data types
• Support accessing Holding register memory as string data with HiLo/LoHi byte order
• RTU Functions used: 01, 02, 03,04, 05, 06, 16
• Supports tag import from Concept and ProWORX programming packages
• Modem Support

  • Automatic Dial Configuration
  • Multiple Phone Number Management
• Communication Serialization

Modbus ASCII Serial

• Any Modbus ASCII Compliant PLC
• Any Device Supporting Modbus ASCII
• Flow Computers

• Supports Ethernet Encapsulation
• Modbus ASCII Multi-drop Supported
• Full Address Range Support ( 0 - 65535 )
• User Definable Read Block Sizes
• Adjustable Address Base ( 0 or 1 )
• Word Order Swapping for Floating Point and Longs
• RTU Functions used: 01, 02, 03, 04, 05, 06, 16
• Direct Support of Flow Automation flow computers
• All memory types and data types supported
• Modem Support

  • Automatic Dial Configuration
  • Multiple Phone Number Management
• Communication Serialization

Modbus Unsolicited Serial
(RTU Slave)

• Any Modbus compatible devices

• Modbus RTU Multi-drop Supported
• Can appear as Multiple Modbus Slave devices
• Station numbers selectable from 1-247
• Full Address Range Support ( 0 - 65535 )
• Hex Addressing Support (0-FFFF)
• Adjustable Address Base ( 0 or 1 )
• Word Order Swapping on Floating Point and Long
• Data Modbus RTU functions accepted by Slave: 01, 02, 03, 04, 05, 06, 16

Modbus Plus

• AT-984 Programmable Controller Board
• SA85-PCI
• SA85 (-002 and -001) PC Interface Cards
• Modbus Plus ISA PC Adapter Card - Schneider part#: AM-SA85-030
• Modbus Plus PCI PC Adapter Card Schneider part#: 416 NHM 300 30
• Modbus Plus Type II PCMCIA Card - Schneider part#: 416 NHM 212 30
• Modbus Plus Type III PCMCIA Card - Schneider part#: 416 NHM 212 33
• Modbus Plus Type III PnP PCMCIA Card - Schneider part#: 416 NHM 212 34
• Hilscher CIF Card - For this configuration, the driver requires Hilscher's SyCon configuration
  software to be installed on the same machine as the card. Also, configuration of the card is performed and downloaded through SyCon

• Automatic Tag Database Generation
• Supports tag import from Concept and ProWORX programming packages
• SA85-PCMCIA (Windows95 only)
• Supports up to four SA85 cards in one PC
• Supports Multiple Access Paths per card
• Modicon X84 w Modbus Plus features
• Modicon TIO Remote I/O Modules
• Supports Memory Accesses to 65535
• 0xxxx - Output Coils, 1xxxx - Input Coils, 3xxxx - Internal Registers, 4xxxx - Holding Registers
• Supports accessing Holding Register memory as string data with HiLo/LoHibyte ordering
• All data types and arrays are supported
• Order Modicon part # "SW-LNET-INT" or "SW-LNET-I95"